CSW16024
WPC Fluted Wall Panel CSW16024
CSW16024 is a 160mm fluted WPC wall panel with a 2900x160x24mm board size and deep slat relief …
View Details
Hollow WPC Timber Tube for Ceiling Baffles & Screens
CWT100 is a hollow WPC timber tube in 100x50mm and 50x50mm sections, used for ceiling baffles, screens and column wraps. The hollow core keeps spans light while the wood-grain face gives the look of a solid timber batten.
CWT100 is a hollow timber tube extruded in WPC: standard sections are 100x50mm and 50x50mm, in lengths up to 2900mm. It is the product for suspended ceiling baffles, vertical screens, room dividers and slatted column wraps, where a timber batten look is wanted but solid timber would be too heavy, too costly or too moisture sensitive.
The hollow profile is the functional point. A 100x50mm tube spans further between supports than a solid batten of the same face size, keeps weight off the ceiling grid, and hides wiring or lighting cable inside the cavity. Tubes are pre-finished in a consistent color and can be cut, drilled and screwed with ordinary tools on site.
| Material | Wood-plastic composite (WPC/PVC resin, wood fiber), water absorption <0.8% |
|---|---|
| Standard Size | 100x50mm, 50x50mm, length up to 2900mm |
| Thickness | 1.5 to 2.0mm wall |
| Surface Finish | Wood-grain hollow tube, matte finish |
| Color Range | 6 colors: teak, walnut, oak, champagne, charcoal, white |
| Fire Rating | B1 (GB 8624) |
| Installation | Suspended on hangers or brackets, screwed or clipped |
| MOQ | 500 m2 |
The cavity gives stiffness at low weight, so 100x50mm tubes need fewer suspension points on baffle ceilings.
A wood-grain composite face reads as a timber batten, without warping, splitting or annual refinishing.
Wiring for baffle lighting can run inside the tube cavity, keeping the visible ceiling face clean.
Standard woodworking tools cut and drill the tube, so installers adapt lengths on site without special equipment.
Sizes, thicknesses and finishes can be customized for OEM orders — send us your target specification and we will confirm feasibility.
| Material | Wood-plastic composite (WPC/PVC resin, wood fiber), water absorption <0.8% |
|---|---|
| Standard Size | 100x50mm, 50x50mm, length up to 2900mm |
| Thickness | 1.5 to 2.0mm wall |
| Surface Finish | Wood-grain hollow tube, matte finish |
| Color Range | 6 colors: teak, walnut, oak, champagne, charcoal, white |
| Fire Rating | B1 (GB 8624) |
| Installation | Suspended on hangers or brackets, screwed or clipped |
| MOQ | 500 m2 |
Screen colors are indicative only — request a physical color card for accurate matching.
Set out the baffle spacing on the slab and mark hanger positions in parallel rows.
Fix suspension hangers or brackets at 900mm centers along each tube run.
Clip or screw the tube onto the brackets, keeping spacing and alignment even.
Add end caps, check the baffle line by eye, and clean the tube faces.
We photograph every container during loading and send the packing list before the vessel sails.
Ceiling panels, hollow tubes, baffles and the matching suspension system.
Contact Us
CSW16024
CSW16024 is a 160mm fluted WPC wall panel with a 2900x160x24mm board size and deep slat relief …
View Details
CSW16024B
CSW16024B is the variant B profile of our 160mm fluted wall panel, 2900x160x24mm, with a wider …
View Details
CSW15015
CSW15015 is a semi-circle arc WPC wall panel with 150mm wide curved slats that catch light in a…
View Details
CSW16022
CSW16022 is a modern linear WPC wall panel with a slim 160mm design slat and a clean, architect…
View DetailsFields marked * are required. We never share your details.
Send us your product list, quantity and destination port. Our export team replies with a full quotation within 24 hours.