Bamboo Charcoal Wood Veneer BCW-WG

Name: Bamboo Charcoal Wood Veneer - Wood Grain
Brand: Li'en
SKU: BCW-WG
Availability: InStock

01

Overview

BCW-WG is a bamboo charcoal wood veneer board built on an 8 mm rigid composite core. Its surface film is embossed in register with the printed grain, so open pores, cathedral figures and color shifts line up the way they do on real timber. Sheets measure 1220 x 2800 mm, and the same core is available in 5 mm and 9 mm for cabinet doors, ceilings and curved detailing.

The board is specified for interior feature walls, hotel and office fit-out, wardrobe and cabinet doors, and lift lobby cladding. It cuts with woodworking tools, bonds with construction adhesive over plaster or cement board, and needs no sanding or lacquering. A moisture resistant core and a sealed film keep the surface stable in humid rooms.

Material	Bamboo charcoal composite core with synchronized wood grain film
Standard Size	1220 x 2800 mm (2440 / 2900 mm on request)
Thickness	8 mm (5 mm and 9 mm available)
Surface Finish	Matte wood grain, synchronized embossed texture
Color Range	Walnut, light oak, black walnut, teak, ash grey, cherry
Fire Rating	B1 (GB 8624)
Installation	Construction adhesive or concealed clip fixing, dry installation
MOQ	300 m2 per stock color, 500 m2 for custom colors

02

Product Features

Synchronized Wood Grain

Embossing is registered with the printed grain, so pores and cathedral figures line up the way they do on real oak or walnut.

Rigid 8 mm Core

The 8 mm bamboo charcoal core stays flat on long spans and resists dents, so panels suit door faces and partitions without a backing board.

E0 and B1 Certified

E0 formaldehyde release and a B1 fire rating cover the interior specification requirements of most hotel, office and retail fit-out projects.

Dry Fast Installation

Boards cut with a standard circular saw and bond with adhesive, so there are no wet trades, no curing time and no on-site finishing.

03

Specifications

Sizes, thicknesses and finishes can be customized for OEM orders — send us your target specification and we will confirm feasibility.

Material	Bamboo charcoal composite core with synchronized wood grain film
Standard Size	1220 x 2800 mm (2440 / 2900 mm on request)
Thickness	8 mm (5 mm and 9 mm available)
Surface Finish	Matte wood grain, synchronized embossed texture
Color Range	Walnut, light oak, black walnut, teak, ash grey, cherry
Fire Rating	B1 (GB 8624)
Installation	Construction adhesive or concealed clip fixing, dry installation
MOQ	300 m2 per stock color, 500 m2 for custom colors

04

Colors & Finishes

Screen colors are indicative only — request a physical color card for accurate matching.

Walnut

Light Oak

Black Walnut

Teak

Ash Grey

Cherry

05

Applications

Interior feature and TV walls

Hotel and office fit-out

Wardrobe and cabinet doors

Shop and lift lobby cladding

06

Installation

Let boards acclimatize in the room for 24 hours, then check the substrate is dry, flat and dust free.

Cut with a fine-tooth blade and keep the protective film on until the panel is fixed and trimmed.

Run adhesive beads vertically at 300 mm centers, or fix concealed clips on a batten grid for doors.

Press each board home, leave a 2-3 mm gap at edges, fit matching trims and peel off the film.

Packing & Loading

Boards are stacked face to face on plywood pallets, wrapped in PE film with hardboard corner protection.
Each pallet carries a label with model, color code, quantity, batch number and gross weight.
A 20 ft container loads about 320 m2 of 8 mm board in 2800 mm length, depending on pallet height.

Loading & documents

We photograph every container during loading and send the packing list before the vessel sails.

07

Bamboo Charcoal Wood Veneer - Wood Grain — Product FAQ

The surface is a printed and embossed film rather than sliced timber, so grain repeat is more uniform and cost is far lower. It cannot be sanded like real veneer, but it will not split or lift in humid rooms the way thin veneer can.

Yes, in normal interior conditions. The core is moisture resistant and the film is sealed, so splashes and steam are not a problem. For shower enclosures and areas in direct water contact, use tile or a dedicated wet-area panel instead.

Stock thicknesses are 5 mm, 8 mm and 9 mm on 1220 x 2800 mm sheets. Minimum order is 300 m2 per color for stock items and 500 m2 for custom colors, with 15-20 working days lead time.

Edges are closed with matching PVC or aluminum edge banding, or hidden behind trims and shadow gaps. Our color range covers standard banding codes, so an edge can be finished in the same tone as the face.

Free Sample

Downloads