Foshan Li'en New Materials Co., Ltd. Factory-direct · one-stop colour matching Mon–Sat 08:30–18:00 (GMT+8)
Model 波浪板系列 · Decorative Line

Wave Panel Trim Series (JYC-DZ)

Aluminium trims for wave panel edges

Aluminium trims for wave panels, in two models: JYC-DZ-30 and JYC-DZ-308. They close the cut edge of a wave panel and finish the top and bottom of a wave wall, where a straight line is needed against a curved face.

Two ModelsWave PanelsAluminium500 m MOQ
MaterialAluminium alloy
Profile SizeFor wave panels, on request
Visible FaceOn request
01

Overview

Wave panels are shaped, so their edges cannot simply be butted to a wall or a floor. The JYC-DZ series gives that edge a straight aluminium line: JYC-DZ-30 and JYC-DZ-308 close the cut edge and finish the head and base of a wave wall, so a curved face meets a straight datum cleanly.

Both models are produced in 2900 mm standard lengths with custom lengths on request, and finish is confirmed per project. The trims are sized so the wave profile does not have to be cut back to a flat land, which keeps the panel module intact along the wall.

MaterialAluminium alloy
Profile SizeFor wave panels, on request
Visible FaceOn request
Section AreaOn request
Length2900 mm standard, custom lengths on request
Colour RangeOn request
InstallationScrew or adhesive fixing, method on request
MOQ500 m per profile per colour
02

Product Features

Two Wave Models

JYC-DZ-30 and JYC-DZ-308 cover the edge and the head or base condition on a wave panel wall.

Straight Against Curved

The trim gives a straight line where a wave face meets a floor, ceiling or corner, so the junction reads as a detail.

Keeps the Module

Panels are not cut back to a flat land, so the wave rhythm runs to the trim without a flat margin.

2900 mm Standard

Standard lengths follow the panel module and can be cut on site, with custom lengths on request.

03

Specifications

Sizes, thicknesses and finishes can be customized for OEM orders — send us your target specification and we will confirm feasibility.

MaterialAluminium alloy
Profile SizeFor wave panels, on request
Visible FaceOn request
Section AreaOn request
Length2900 mm standard, custom lengths on request
Colour RangeOn request
InstallationScrew or adhesive fixing, method on request
MOQ500 m per profile per colour
04

Colors & Finishes

Screen colors are indicative only — request a physical color card for accurate matching.

Natural Silver
Champagne
Titanium Grey
Matte Black
05

Applications

Wave wall edges

Wave wall edges

Head and base trims

Head and base trims

Feature walls

Feature walls

Reception details

Reception details

06

Installation

Set out the wave panel first and mark where the trim line falls at head and base.

Cut a test piece of trim and check that it closes the wave edge without flattening the profile.

Fix the trim to the substrate, then seat the panel so the wave runs into the trim lip.

Clean the trim, check the line against a straightedge and protect it until handover.

Packing & Loading

  • Trims are bundled by model with sleeves and end caps.
  • Bundles carry the model, finish and quantity on the label.
  • Loading plans cover 20 ft and 40 ft containers at Shenzhen or Guangzhou.

Loading & documents

We photograph every container during loading and send the packing list before the vessel sails.

07

Wave Panel Trim Series (JYC-DZ) — Product FAQ

Both JYC-DZ-30 and JYC-DZ-308 can finish a head or base condition; the choice depends on the wave profile and how the panel meets the ceiling. Send the section and we confirm.
No. The trim is shaped to take the wave profile, so the panel runs into the trim without a flat land, which keeps the rhythm consistent along the wall.
Finish is confirmed on request and sampled against the panel colour before production. On wave walls the trim is usually kept to a quiet tone so the profile stays the focus.
500 m per profile per colour, with each of the two models carrying its own minimum. Head and base trims are usually ordered together.
Downloads

Downloads

Decorative Line Catalogue 2025

Skirting ZY001-ZY057+ and the trim families, each with its section profile an…

Download
Related Products

Related Products

Get a Quote

Get a quotation for this product

  • Reply timeWithin 24 hours on working days
  • Free sampleCourier cost only, credited on your first order
  • DocumentsThird-party test reports supplied on request

Send an inquiry

Fields marked * are required. We never share your details.

Chat on WhatsApp

By sending this form you agree that we may contact you about your inquiry.

Get quotes and free samples right now!

Send us your product list, quantity and destination port. Our export team replies with a full quotation within 24 hours.