Foshan Li'en New Materials Co., Ltd. Factory-direct · one-stop colour matching Mon–Sat 08:30–18:00 (GMT+8)
Model 冰火板7厘系列 · Decorative Line

Compact Board 7 mm Trim Series (YC7)

Aluminium trims for 7 mm compact laminate edges

Aluminium trims for 7 mm compact laminate boards, covering YC7-03A-0.45 and YC7-04A-0.45. They close the cut edge of a compact board cleanly, which keeps the panel reading as a solid sheet rather than a faced board.

7 mm BoardsTwo ModelsAluminium500 m MOQ
MaterialAluminium alloy
Profile SizeFor 7 mm compact boards
Visible FaceOn request
01

Overview

Compact laminate boards are used where a dense, hard-wearing face is wanted, and their cut edges need a trim that closes the core rather than covering it. The YC7 series does that with two models: YC7-03A-0.45 and YC7-04A-0.45, sized for 7 mm boards.

Both are supplied in 2900 mm standard lengths with custom lengths on request. Finish is confirmed per project, and the trim is chosen against the board edge so the aluminium sits flush with the face. The result is a panel that reads as a solid sheet, with no visible core at the edge.

MaterialAluminium alloy
Profile SizeFor 7 mm compact boards
Visible FaceOn request
Section AreaOn request
Length2900 mm standard, custom lengths on request
Colour RangeOn request
InstallationScrew or adhesive fixing, method on request
MOQ500 m per profile per colour
02

Product Features

Sized for 7 mm

Both models are sized for 7 mm compact boards, so the trim closes the edge without standing proud of the face.

Closes the Core

The profile covers the cut edge fully, which keeps the compact board reading as a solid sheet.

Two Edge Details

YC7-03A-0.45 and YC7-04A-0.45 cover two edge and corner conditions used on compact board linings.

2900 mm Standard

Standard 2900 mm follows the panel module for full-height linings, with custom lengths on request.

03

Specifications

Sizes, thicknesses and finishes can be customized for OEM orders — send us your target specification and we will confirm feasibility.

MaterialAluminium alloy
Profile SizeFor 7 mm compact boards
Visible FaceOn request
Section AreaOn request
Length2900 mm standard, custom lengths on request
Colour RangeOn request
InstallationScrew or adhesive fixing, method on request
MOQ500 m per profile per colour
04

Colors & Finishes

Screen colors are indicative only — request a physical color card for accurate matching.

Natural Silver
Champagne
Titanium Grey
Matte Black
05

Applications

Compact board edges

Compact board edges

Wet area linings

Wet area linings

Cubicle panels

Cubicle panels

Worktop edges

Worktop edges

06

Installation

Measure the board thickness at the cut edge, since compact boards can vary slightly from nominal.

Dry-fit a short offcut in the trim and check that the edge is fully covered.

Fix the trim with the agreed method, keeping it flush and the fixing heads out of sight.

Clean the trim, check the edge line and protect it until the panels are installed.

Packing & Loading

  • Trims are bundled by model with sleeves and end caps.
  • Bundles are labelled with model, finish and quantity.
  • Containers load at Shenzhen or Guangzhou for 20 ft and 40 ft shipments.

Loading & documents

We photograph every container during loading and send the packing list before the vessel sails.

07

Compact Board 7 mm Trim Series (YC7) — Product FAQ

The series is sized for 7 mm compact boards. Measure the actual edge thickness before ordering, since boards can vary slightly, and we confirm the fit with a sample.
It is used on compact board linings including wet areas. Confirm the fixing method and sealant detail with us for the specific location before installation.
They cover two different edge and corner conditions on compact board work. Send the section drawing and we confirm which model suits the junction.
500 m per profile per colour, with each model carrying its own minimum. A lining using both models therefore carries two minimums.
Downloads

Downloads

Decorative Line Catalogue 2025

Skirting ZY001-ZY057+ and the trim families, each with its section profile an…

Download
Related Products

Related Products

Get a Quote

Get a quotation for this product

  • Reply timeWithin 24 hours on working days
  • Free sampleCourier cost only, credited on your first order
  • DocumentsThird-party test reports supplied on request

Send an inquiry

Fields marked * are required. We never share your details.

Chat on WhatsApp

By sending this form you agree that we may contact you about your inquiry.

Blog

Recent Articles

Get quotes and free samples right now!

Send us your product list, quantity and destination port. Our export team replies with a full quotation within 24 hours.