Foshan Li'en New Materials Co., Ltd. Factory-direct · one-stop colour matching Mon–Sat 08:30–18:00 (GMT+8)
Model 碳晶板(三层结构基材) · Wall Panels

Carbon Crystal Board

Three-layer substrate — any of our 150 films on top

A carbon crystal substrate built as a three-layer sandwich: acrylic crystal ceramic face, bamboo charcoal fibre core, acrylic crystal ceramic back. Sold as the base board, finished with any film from our 150-colour collection.

Three-layer sandwichBamboo charcoal core150 films1220 mm board
MaterialBamboo charcoal fibre core + acrylic crystal ceramic faces
Profile Size1220 mm board width
Visible FaceDepends on film — any of 150 codes
01

Overview

Carbon crystal board is the base substrate of our wall panel range, not a finished product in itself. It is built as a three-layer sandwich: an acrylic crystal ceramic layer on the face, a bamboo charcoal fibre core, and another crystal ceramic layer on the back. That construction is why the board stays flat and resists deformation better than a single-layer panel.

The core is a compound of PVC resin powder, bamboo charcoal fibre powder and natural calcium carbonate. We run calcium-zinc stabilisers rather than lead salt and bond the film with imported PUR adhesive. On top of this board we laminate whichever film your project needs, from the 150 colour codes in our collection.

MaterialBamboo charcoal fibre core + acrylic crystal ceramic faces
Profile Size1220 mm board width
Visible FaceDepends on film — any of 150 codes
Section AreaOn request
LengthMade to order
Colour RangeAny film from our collection (150 colour codes)
InstallationStructural adhesive, or grooved for I-strip / tongue-and-groove
MOQ300 m² per colour
02

Product Features

Three-layer sandwich core

Crystal ceramic on both faces with a bamboo charcoal fibre core between them, which is what keeps the board flat over long spans.

Bamboo charcoal fibre core

The core is PVC resin powder, bamboo charcoal fibre powder and natural calcium carbonate — not a paper honeycomb or a hollow box.

Environmentally friendly stabilisers

Calcium-zinc stabilisers throughout instead of lead salt, with imported PUR adhesive for the film bond.

Your choice of film on top

Any film from our collection can be laminated to this board — wood grain, fabric, leather, slate, metal, mirror, gloss or water ripple.

03

Specifications

Sizes, thicknesses and finishes can be customized for OEM orders — send us your target specification and we will confirm feasibility.

MaterialBamboo charcoal fibre core + acrylic crystal ceramic faces
Profile Size1220 mm board width
Visible FaceDepends on film — any of 150 codes
Section AreaOn request
LengthMade to order
Colour RangeAny film from our collection (150 colour codes)
InstallationStructural adhesive, or grooved for I-strip / tongue-and-groove
MOQ300 m² per colour
04

Colors & Finishes

Screen colors are indicative only — request a physical color card for accurate matching.

GH-01
GH-45
GH-63
GH-21
GH-97
GH-157
05

Applications

Hotel guestrooms

Hotel guestrooms

Apartment fit-out

Apartment fit-out

Office partitions

Office partitions

Hospital corridors

Hospital corridors

06

Installation

Check that the substrate is flat, dry and dust free before setting out the first panel.

Dry-lay the panels to confirm the joint layout and the cut positions at the edges.

Fix with adhesive or mechanical fasteners as specified, working from a true datum.

Clean the joints, fit the matching trim, and protect the face until handover.

Packing & Loading

  • Crated in wooden cases with corner protection on all four edges.
  • Faces are stacked face to face to protect the finished surface.
  • Loading is photographed and the photos travel with the packing list.

Loading & documents

We photograph every container during loading and send the packing list before the vessel sails.

07

Carbon Crystal Board — Product FAQ

It is used where a wall should read as one continuous surface rather than a series of fluted strips, such as hotel feature walls, retail backdrops and lift lobbies.
Yes. It comes from the same 1201–1229 series and the same decorative film, so flat panels, fluted panels and trims can be produced in one colour.
Sizes are made to order. Send us the panel size your design needs and we will confirm what the line can run and how it will be edged.
300 m² per colour for interior panels, with a lead time of 15 to 25 working days depending on series and finish.
Downloads

Downloads

Wall Panel Colour Card

All 219 colour codes across series 1201-1229, one series per page, with every…

Download
Related Products

Related Products

Get a Quote

Get a quotation for this product

  • Reply timeWithin 24 hours on working days
  • Free sampleCourier cost only, credited on your first order
  • DocumentsThird-party test reports supplied on request

Send an inquiry

Fields marked * are required. We never share your details.

Chat on WhatsApp

By sending this form you agree that we may contact you about your inquiry.

Get quotes and free samples right now!

Send us your product list, quantity and destination port. Our export team replies with a full quotation within 24 hours.