经典款(80–140 mm)
Classic Skirting Line (ZY Series, 80–140 mm)
A white decorative skirting line from the ZY series in heights from 80 mm to 140 mm, with one p…
View Details
Aluminium trims for wave panel edges
Aluminium trims for wave panels, in two models: JYC-DZ-30 and JYC-DZ-308. They close the cut edge of a wave panel and finish the top and bottom of a wave wall, where a straight line is needed against a curved face.
Wave panels are shaped, so their edges cannot simply be butted to a wall or a floor. The JYC-DZ series gives that edge a straight aluminium line: JYC-DZ-30 and JYC-DZ-308 close the cut edge and finish the head and base of a wave wall, so a curved face meets a straight datum cleanly.
Both models are produced in 2900 mm standard lengths with custom lengths on request, and finish is confirmed per project. The trims are sized so the wave profile does not have to be cut back to a flat land, which keeps the panel module intact along the wall.
| Material | Aluminium alloy |
|---|---|
| Profile Size | For wave panels, on request |
| Visible Face | On request |
| Section Area | On request |
| Length | 2900 mm standard, custom lengths on request |
| Colour Range | On request |
| Installation | Screw or adhesive fixing, method on request |
| MOQ | 500 m per profile per colour |
JYC-DZ-30 and JYC-DZ-308 cover the edge and the head or base condition on a wave panel wall.
The trim gives a straight line where a wave face meets a floor, ceiling or corner, so the junction reads as a detail.
Panels are not cut back to a flat land, so the wave rhythm runs to the trim without a flat margin.
Standard lengths follow the panel module and can be cut on site, with custom lengths on request.
Sizes, thicknesses and finishes can be customized for OEM orders — send us your target specification and we will confirm feasibility.
| Material | Aluminium alloy |
|---|---|
| Profile Size | For wave panels, on request |
| Visible Face | On request |
| Section Area | On request |
| Length | 2900 mm standard, custom lengths on request |
| Colour Range | On request |
| Installation | Screw or adhesive fixing, method on request |
| MOQ | 500 m per profile per colour |
Screen colors are indicative only — request a physical color card for accurate matching.
Set out the wave panel first and mark where the trim line falls at head and base.
Cut a test piece of trim and check that it closes the wave edge without flattening the profile.
Fix the trim to the substrate, then seat the panel so the wave runs into the trim lip.
Clean the trim, check the line against a straightedge and protect it until handover.
We photograph every container during loading and send the packing list before the vessel sails.
Skirting ZY001-ZY057+ and the trim families, each with its section profile an…
Download
经典款(80–140 mm)
A white decorative skirting line from the ZY series in heights from 80 mm to 140 mm, with one p…
View Details
高款(150–220 mm)
A tall white skirting line from the ZY series in heights from 150 mm to 220 mm, for rooms that …
View Details
8厘系列
A family of aluminium edge trims for 8 mm panels, covering ZH-801B, ZH-806, ZH-808, ZH-801, ZH-…
View Details
9厘系列
A three-model aluminium trim family for 9 mm panels: YP-905, ZH-906 and ZH-9DX-50. The profiles…
View DetailsFields marked * are required. We never share your details.
Send us your product list, quantity and destination port. Our export team replies with a full quotation within 24 hours.