第一代塑木地板
First Generation WPC Decking (YK/14025/SMC)
A first-generation WPC decking board at 140 mm × 25 mm, made from wood powder and plastic compo…
View Details
Adjustable pedestals, WPC joists and concealed clips
The outdoor installation system brings together height-adjustable pedestals, WPC joists and concealed clips. It carries a deck over a sound substrate without fixing into it, so an existing floor or roof membrane is not damaged by the deck build-up.
The deck is only as good as what holds it up, and the Li'en outdoor system is built around that: height-adjustable pedestals, WPC joists and concealed clips, used together or in part depending on the substrate. The pedestals carry the joists, the joists carry the boards, and the clips hold the boards without a fixing through the walking surface.
The practical benefit is that the deck is adjustable and does not require damaging the floor substrate. Height is set at the pedestal, so the finished level can be corrected across a slope or a roof, and the waterproofing or existing finish below stays intact because nothing is fixed through it.
| Material | Adjustable pedestals, WPC joists, concealed clips |
|---|---|
| Profile Size | On request |
| Visible Face | Not applicable (support system) |
| Section Area | On request |
| Length | 2900 mm standard for joists, on request |
| Colour Range | On request |
| Installation | Pedestal and joist system, no fixing into the substrate |
| MOQ | On request, quoted with the deck order |
Height is set at the pedestal, so the deck level can be corrected across a slope or a roof without packing.
The build-up sits over the substrate instead of fixing into it, so an existing floor or membrane stays intact.
WPC joists carry the boards and match the deck material, so the frame behaves like the surface above it.
Clips hold each board from the side, keeping fixings out of the walking surface and the line even.
Sizes, thicknesses and finishes can be customized for OEM orders — send us your target specification and we will confirm feasibility.
| Material | Adjustable pedestals, WPC joists, concealed clips |
|---|---|
| Profile Size | On request |
| Visible Face | Not applicable (support system) |
| Section Area | On request |
| Length | 2900 mm standard for joists, on request |
| Colour Range | On request |
| Installation | Pedestal and joist system, no fixing into the substrate |
| MOQ | On request, quoted with the deck order |
Screen colors are indicative only — request a physical color card for accurate matching.
Check the substrate and the fall, then set out the pedestal grid to the joist spacing.
Set each pedestal to level and lock the height before the joists are laid.
Lay the WPC joists, check the grid and fix the concealed clips along each joist.
Lay the boards, adjust any high points at the pedestals and fit the edge trim.
We photograph every container during loading and send the packing list before the vessel sails.
WPC decking and ASA wall panels with model numbers, section sizes, colour ran…
Download
第一代塑木地板
A first-generation WPC decking board at 140 mm × 25 mm, made from wood powder and plastic compo…
View Details
第一代塑木地板(3D 木纹)
The 3D version of the first-generation board, at 140 mm × 25 mm with a deeper wood-grain emboss…
View Details
第二代塑木地板
A second-generation WPC decking board at 138 mm × 22 mm, in eight wood-toned colours including …
View Details
第二代 ASA 墙板
An ASA wall panel at 170 mm × 15 mm with a 150 mm usable width, co-extruded with a weather-resi…
View DetailsFields marked * are required. We never share your details.
Send us your product list, quantity and destination port. Our export team replies with a full quotation within 24 hours.