碳晶板(三层结构基材)
Carbon Crystal Board
A carbon crystal substrate built as a three-layer sandwich: acrylic crystal ceramic face, bambo…
View Details
Triangular 192 mm fluting with a 14.5 mm profile
A triangular grille profile with a 192 mm visible face, a 14.5 mm height and a 936 mm² section, giving a faceted surface that changes with the light. It is aimed at feature walls and atrium details where standard flat fluting would read too quietly.
The Triangle Grille Panel brings a faceted, three-dimensional line to interior walls. The visible face is 192 mm wide and the profile stands 14.5 mm high, so each repeat carries two angled planes that catch light differently as you walk past. On a large wall that effect stays architectural rather than decorative, because the pitch is wide and the pattern repeats evenly from floor to ceiling.
The measured 936 mm² section gives the angled form enough body to stay true along a 2900 mm length. Panels are produced in the same 19 series and 219 colour codes as the rest of the interior grille range, with grooved and ungrooved options across the family, so a faceted wall can sit next to fine fluting in one shade.
| Material | On request |
|---|---|
| Profile Size | 192 mm face × 14.5 mm height |
| Visible Face | 192 mm |
| Section Area | 936 mm² |
| Length | 2900 mm standard, custom lengths on request |
| Colour Range | 19 series (1201 to 1229), 219 colour codes |
| Installation | Adhesive or mechanical fixing, method on request |
| MOQ | 300 m² per colour |
Two angled planes per repeat make the wall change tone as light moves, which suits entrance walls, atrium features and brand areas.
The measured 936 mm² section keeps the angled face rigid over long runs, so the ridge line stays straight along the whole wall.
A 14.5 mm height gives a clear shadow without a heavy relief, keeping the wall easy to dust and suitable for busy interiors.
It shares the 19 series and 219 colour codes with the other interior grille panels, so a faceted field and flat fluting stay on one shade.
Sizes, thicknesses and finishes can be customized for OEM orders — send us your target specification and we will confirm feasibility.
| Material | On request |
|---|---|
| Profile Size | 192 mm face × 14.5 mm height |
| Visible Face | 192 mm |
| Section Area | 936 mm² |
| Length | 2900 mm standard, custom lengths on request |
| Colour Range | 19 series (1201 to 1229), 219 colour codes |
| Installation | Adhesive or mechanical fixing, method on request |
| MOQ | 300 m² per colour |
Screen colors are indicative only — request a physical color card for accurate matching.
Mark the ridge line and set the direction on a layout drawing before any panel is cut.
Dry-lay two panels under the final lighting to check that the facet lines meet cleanly across the joint.
Fix with the agreed adhesive or mechanical method, keeping each panel plumb and the ridge line continuous.
Clean the grooves, check the facets for marks and protect the wall until the fit-out is complete.
We photograph every container during loading and send the packing list before the vessel sails.
All 219 colour codes across series 1201-1229, one series per page, with every…
Download
碳晶板(三层结构基材)
A carbon crystal substrate built as a three-layer sandwich: acrylic crystal ceramic face, bambo…
View Details
SPC 石晶板(基材)
An SPC stone-plastic composite board used as a wall substrate where a denser, harder base is wa…
View Details
防撞板(基材)
A wall protection board for corridors, wards and service areas where trolleys and beds hit the …
View Details
饰面膜 · 150 个色号 / 10 个系列
The film library behind every wall panel we sell: 150 colour codes across 10 finish series, fro…
View DetailsFields marked * are required. We never share your details.
Send us your product list, quantity and destination port. Our export team replies with a full quotation within 24 hours.